VFC M249 Improved Standoff Nozzle Return Spring V2 Preorder it creates a TDC like

it creates a TDC like effect without having to drill through the upper receiver

This nozzle spring is designed to have the nozzle start slightly forward of the bolt carrier so that bbs are seated before the bolt carrier is fully forward

UNBREAKABLE WITH ABNORMAL USE

This is a clone of the classic handgaurd for the DPMS Kitty Kat

-All hardware is included excluding bonding adhesive (JB Weld recommended)

VFC M249 Improved Standoff Nozzle Return Spring V2 Preorder it creates a TDC likeV2 has a thicker wire diameter than v1. This nozzle spring is designed to have the nozzle start slightly forward of the bolt carrier so that bbs are seated before the bolt carrier is fully forward. In practice this should allow bbs to enter the chamber and stabilize before being shot. This will improve precision. please note that the compression part of the spring should be connected to the nozzle pin while the tension part of the spring should be